Aircast Cryo/Cuff Tube Assembly - All Questions
Aircast Cryo/Cuff Tube Assembly
SKU
2130
On my Cryo/Cuff I have broken the nozzle on the screw on cap that is attached to the cooler. Does this Tube Assembly come with this part? Thank you ...Norman Gardner
Question by: Norman Gardner on Aug 26, 2010, 7:27 AM
I am very sorry but that piece is not replaceable. It does not come with the tube assembly. The unit will have to be replaced.
Answer by: Admin on Aug 26, 2010, 7:27 AM
Does the Replacement Tubing for Cryo/Cuff include the screw on cap that connects to the tubing?
Question by: celeste on Jan 6, 2011, 7:41 PM
The tube assembly does include the attachment pieces on both ends of the tube: the clip attachment to the cuff and the twist on connector for the cooler.
Answer by: Admin on Jan 6, 2011, 7:41 PM
I had this machine AIRCAST Cryo/Cuff IC at Columbia Presbyterian Hospital after I had "totaly right knee replacement", so when I left the hospital for nursing home I took the machine without the power cord. Very soon I will have the left knee surgery and I want to use the machine. Can you help to get in posesion of a power cord or probabily give me some technical information about it that i can buy it in the store. The best for me is to buy it anew one from you.
Thank you very much for your help
Cornel
Thank you very much for your help
Cornel
Question by: Cornel Nicolae on Jan 22, 2011, 10:46 AM
Answer by: Admin on Jan 22, 2011, 10:46 AM
Do you sell just the o-ring on the hose of cyro/cuff?
Question by: Jim on Jul 11, 2014, 5:17 AM
Thank you for your question. We do not sell just the O-ring. You would need to purchase the Tube Assembly.
Answer by: Admin on Jul 11, 2014, 5:17 AM
Does the replacement tubing include the plastic assembly that connects to the tube and provides passage for the water through to the inside of the cooler? That assembly has a threaded end for screw-on attachment to the tube, and also a threaded end for a screw-on flange piece at the inside of the cooler. I've broken that plastic piece with the threaded ends. BTW, I have a very old Cryo/Cuff (20 years old).
Question by: James on Jul 19, 2014, 6:25 AM
The tube assembly has the white plastic piece that screws into the cooler on one end and on the other end has the plastic piece (male end) that connects to the cold pad
Answer by: Admin on Jul 19, 2014, 6:25 AM
Does the new tube have a shut off. Mime came with a lil plastic clip.
Question by: Carl on Jul 21, 2014, 7:07 PM
No Once you disconnect the tube from the pad water does not escape the pad or the tube
Answer by: Admin on Jul 21, 2014, 7:07 PM
I need a longer tube where I sit with my cooler. Is there an extension tube available?
Question by: Barbarz on Oct 15, 2014, 4:48 AM
Barbara
We do not have an extended hose for this unit
We do not have an extended hose for this unit
Answer by: Admin on Oct 15, 2014, 4:48 AM
What sise is the threaded tube? I just want to make sure that tube will fit before I buy it.
Question by: Melanie Womavk on Feb 22, 2015, 9:25 AM
Melanie
If you have a aircast Cryocuff the tube assembly will fit it.
If you have a aircast Cryocuff the tube assembly will fit it.
Answer by: Admin on Feb 22, 2015, 9:25 AM
Can I just by the hose to cuff conector?
Question by: Ken Ladd on Mar 3, 2015, 7:42 PM
Ken
The Tube Assembly is the hose that runs from the cooler and attaches to the cuff
The Tube Assembly is the hose that runs from the cooler and attaches to the cuff
Answer by: Admin on Mar 3, 2015, 7:42 PM
I need the valve that is attached to cryo cuff. Water does not drain out of the cuff and the hose assembly is OK. Help
Question by: ray hackney on Mar 20, 2015, 1:58 PM
Ray
You will need to replace the entire cuff since we do not have replacement parts for the unit. https://www.donjoystore.com/aircast-cryocuffs-only
You will need to replace the entire cuff since we do not have replacement parts for the unit. https://www.donjoystore.com/aircast-cryocuffs-only
Answer by: Admin on Mar 20, 2015, 1:58 PM